 |  | 
 
Don't just turn heads.
Create whiplash!
Product Review by Terry
Freiberg
If you're looking for a high-definition,
laser-sharp shine guaranteed to turn heads, look no further. This is the current
state-of-the-art in paint sealant technology. Wet Diamond, All Finish Paint Protection is the only
domestic paint sealant I know of to use a revolutionary, crystal polymer
recently released by Wacher- Chemie, Munich, Germany. This polymer has a crystal structure that refracts light,
similar to a diamond, to create a vibrant, high-energy, super slippery,
head-turning finish. It can be used by itself as the final sealant or as the
foundation of BLACKFIRE's signature Wet-Ice over Fire shine.
Wet Diamond, All finish Paint Protection is a paint-friendly, oil-in-water, emulsion safe for all
finishes with or without a clear coat. This emulsion
contains a small amount of a very refined mineral spirit in a water base.
Multiple coats can be layered to deepen the gloss without drying or weakening the paint.
|
BLACKFIRE Wet Diamond, All Finish Paint
Protection can be applied by hand or dual-action, machine polisher. It applies easily and buffs off uniformly
even in climates of high heat and high humidity. You simply walk around your car wiping on and buffing off as you go.
The incredible shine is
resistant to detergent washings and ultraviolet radiation. This keeps your car’s finish protected month after month
and wash after wash. |
|
|
|
|
|
My daughter's 7 year old Toyota.
(Freshly washed) Note reflection of yardstick and tree in the paint.
|
Same car 1 hour 15 minutes later!
Clay surface - 35 minutes
Apply Gloss Enhancing Polish - 20 minutes
Apply All Finish Paint Protection - 20 minutes
|
|
 |
BLACKFIRE Wet Diamond All Finish Paint Protection is
now super-charged with Polycharger! |
| No mixing or blending is required. The
Polycharger technology is built-in! Polycharger boosts slickness and shine
while extending the protection and durability. Polycharger does this by
interlocking or cross-linking polymers to create a barrier of invisible
amour with tremendous strength. |
|
 |
|
Hand Application Tips:
- Always use on a cool surface out of direct
sunlight.
- Apply a Quarter size amount of product on a
dry applicator pad and wipe on the surface using small circular motions.
Allow Wet Diamond All Finish Paint Protection to dry before buffing.
- Buff haze with a clean
Microfiber Buffing Cloth.
Machine Application Tips:
- Place a 6-1/2 inch, Hi-Gloss, Constant
Pressure, Red Concours Finishing Pad on a 6 inch Hook and Loop
Backing Plate and attach to your 7424 machine polisher.
- Work on a small area, 24 to 36 inches square,
out of direct sunlight.
- Apply two 6 to 8 inch lines of All Finish
Paint Protection directly to the surface.
- With the machine off, spread the sealant over
the surface using the dry foam pad. This coats the foam pad and the paint
with sealant. (I prefer to apply this sealant with a dry pad, without
using any pad lubricant.)
- Place the Red, Concours Finishing Pad on
the paint and turn the machine on. Set the speed dial on the polisher
between 3-1/2 and 4.
- Work the pad over the surface in a
back-and-forth motion and then an up-and-down motion. Apply until the
sealant starts to dry. Cover one section of the vehicle at a time (i.e. the
hood, a door, fender, etc.)
- Allow a haze to form. Hand buff to a brilliant
shine with a Microfiber Buffing Cloth.
Package
Savings: See our BLACKFIRE New Car
Kit, Clay,
Polish & Shine Kit and Wet-Ice over Fire Shine Kit
for special savings on this and other BLACKFIRE
products.
|
Optional top coat for show vehicles or just showing off:
For ultimate depth and wetness, apply one coat of Wet
Diamond, All Finish Paint Protection and allow to cure for eight hours. Top with
two coats of BLACKFIRE
Midnight Sun Ivory Carnauba Paste Wax.
The resulting shine is wetness over energy, a Wet- Ice over Fire Shine!
|
|
The use of this paste
wax on top of Wet Diamond All Finish Paint Protection is not required
for a great, long-lasting shine. We mention it as an option for
perfectionists or enthusiasts with show vehicles desiring the ultimate
in depth and wetness. Midnight Sun Ivory Carnauba Paste Wax can be
purchased separately, below. (It does not come with this sealant)
Here's what Wet Diamond All Finish Paint
Protection looks like:
|
|
|
|
BLACKFIRE on black. |
|
|
|
BLACKFIRE on silver.
|
|
|
|
Thanks to our customer
Scott W. of Palo Alto, CA for sharing
this photo of his 350Z sporting a BLACKFIRE shine. |
|
And from our customer Chuck M. of
Portage, MI. comes this photo:
|
|
|
| Chuck writes:
"Just
finished detailing my 2003 Acura TL-S with your BLACKFIRE products. What
do you think? You can almost read what products I have on my wall
cabinets.
I love your
BLACKFIRE product line. It is awesome stuff. I've recommended it to
several of my family and friends and they are using it now.
Thank you!" |
And this just in from Greg S. of
Trenton, N.J.
|
|
|
Greg writes:
"Blackfire
Rocks! Just a note of praise for your Blackfire product which I ordered on
3/17/05. I have tried a number of commercial products throughout the years
and never got the results I wanted with black. Read about Blackfire on a
website and decided to give it a try on my 2004 350ZR. Used your Blackfire
Polish, followed by one coat of All Finish Paint Protection, both applied
by hand. Both easy on, easy off---No residues. As you can see from the
photo (above) FANTASTIC JOB! Though my Z is a year and a half old, your
Blackfire shows it up better than even the new 2005 Z's on the dealer's
lot. Thanks for a great product!"
|
|
Wet Diamond All Finish Paint Protection is VOC
compliant in all 50 states.
Wet Diamond
All Finish Paint Protection is a pure sealant without any cleaning power.
For best results, older vehicles should be pre-cleaned with a suitable
BLACKFIRE polish before first time application.
Available in a 16 fl. oz. bottle, 32 oz. and 64 oz. refill.
|
|
|